|
Enertech ? All-In-One RTV Silicone Gasket Maker
Product Description
This is the one RTV Silicone Gasket Maker for all
applications. Hi-Temp, Low-Volatility, and General Use. With the touch of a
finger, you can create a gasket of any size or shape. Unique dispenser keeps
product fresh longer and is more economical to use than a cartridge or tube. RTV
gasket material skins in about fifteen (15) minutes, and cures completely in
twenty-four (24) hours. Product will not shrink or crack when used as directed.
Red in Color
Temperature Range (-85?F to 600?F+)
Paint will not adhere to Silicone RTV.
Uses
O2 Sensors, Cam and Timing Covers, Exhaust
Manifolds, Crossover Manifolds, all other sealing and gasket applications. Meets
GM specs for O2 Sensors, Volatility (Silica Volatiles), tack-free
time, cure-time, temperature range, resistance to hot oil and glycol.
Directions
- Completely remove old gasket material.
- Use a non-flammable cleaner to remove oil and grease.
Make certain surface is clean and dry.
- Hold can upside-down and exert side pressure on
dispensing stem with you finger. Draw an even bead of RTV (1/16? to 1/8? wide)
on one mating surface.
- Using clean, dry cloth, or knife, remove any excess RTV
Silicone.
- Wait approximately five (5) minutes for bead to begin to
?skin? before assembling parts. Be sure parts are properly aligned when
assembling. Be careful not to over-tighten bolts.
Storage
Do not store in temperatures above 120?F (50?C). Do not
puncture, incinerate, or burn can. Do not place near sources of heat.
Specifications
Health
: 1 Flash Point : 212?F
Flammability
: 1 Evaporation Rate : N/A
Reactivity
: 0 Color : Black
Personal Protection
: B Odor
: Acetate Acid
Solubility in Water
: > 0.1
Packaging
Part
Number Size
Can Cans per Case
996006 (Red) 7.25 oz.
12
Send mail to
sales@enertechlabs.com with
questions or comments about this web site.
Copyright © 2003, 2004, 2005, 2006, 2007, 2008, 2009
Enertech Labs, Inc.
Last modified:
01/12/09
|
|
