|
Enertech ? Cooling
System Conditioner
Product Description
Anti-freeze contains a complex group of agents and
inhibitors to protect your cooling system from damaging corrosion. These
components are depleted and wear-out with time and use. Enertech Cooling System
Conditioner replaces these essential inhibitors and adds a long lasting alkaline
reserve agent to your coolant. Helps to prevent pitting, scaling and
electrochemical corrosion to your cooling system. Allows coolant to provide the
maximum heat transfer, while protecting all metal and aluminum components.
Contains a water pump lubricant. Mixes safely with all antifreeze types and will
not harm rubber parts.
Uses
Restores Vital
Inhibitors and Agents to Coolant ♦ Adjusts PH to Prevent Corrosion ♦ Prolongs
Cooling System Life
Directions
DO NOT REMOVE RADIATOR CAP WHILE ENGINE IS HOT
- With engine off and cool, remove radiator cap.
- Be certain that coolant level is a least two (2) inches
from overflow level. (Drain a small amount if necessary).
- Shake bottle well.
- Add entire contents to radiator (will treat up to 22
quarts of anti-freeze solution).
- Start engine and allow it to reach operating
temperature, then run ten more minutes.
This should be repeated every
six months.
NOTE: When using with power
flush machines, follow machine manufacturer?s instructions.
Storage
No special
handling required. Store at room temperature. Avoid Extreme Heat and Freezing.
Specifications
Health
: 2 Flash Point : N/A
Flammability
: 0 Evaporation Rate : ND
Reactivity
: 0 Color : Dark Blue
Personal Protection
: B Odor :
Odorless
Solubility in Water
: ND
Packaging
Part
Number Size
Bottle Cans per Case
8004 12 oz.
12
Prepared 03/06/2004
Send mail to
sales@enertechlabs.com with
questions or comments about this web site.
Copyright © 2003, 2004, 2005, 2006, 2007, 2008, 2009
Enertech Labs, Inc.
Last modified:
01/12/09
|
