|
Enertech ? Cooling
System Flush
Product Description
Almost all cooling systems develop a build-up of scale,
rust, and other corrosion by-products. These deposits on the heat transfer
surfaces radically reduce cooling system effectiveness. The deposits can reduce
coolant flow to the point where overheating and damage can occur. Cooling System
Flush quickly breaks down and flushes away these deposits. It will also flush
oil, grease, and rust in just one application. Cooling System Flush is harmless
to all components. No neutralizer is needed after using this product.
Uses
Quickly and
Safely Removes Scale, Rust, Deposits, Other Contaminants
Directions
DO NOT REMOVE RADIATOR CAP WHILE ENGINE IS HOT
- With engine off and cool, remove radiator cap, drain
cooling system. Close drain valve and refill with clean water.
- Shake can well.
- Pour contents into radiator.
- Replace radiator cap and start engine. Turn heater on
and set to highest temperature. After engine has reached operating
temperature, run between 20 and 30 minutes. Shut off engine.
- After radiator has cooled, drain system and flush with
clean water until effluent is clear.
- Refill radiator and overflow tank with antifreeze to
proper level, replace radiator cap. Add Enertech Radiator Sealant for extra
protection.
NOTE: When using with power
flush machines, follow machine manufacturer?s instructions.
Storage
DO NOT STORE IN TEMPERATURES EXCEEDING 120?F (50?C). DO NOT
STORE IN AUTOMOBILES. DO NOT PUNCTURE OR INCINERATE CAN.
Specifications
Health
: 1 Flash Point : N/A
Flammability
: 0 Evaporation Rate : ND
Reactivity
: 0 Color : Clear Liquid
Personal Protection
: B Odor :
Slight Ammonia odor
Solubility in Water
: Soluble
Packaging
Part
Number Size
Bottle Cans per Case
8007 12 oz.
12
Prepared 03/06/2004
Send mail to
sales@enertechlabs.com with
questions or comments about this web site.
Copyright © 2003, 2004, 2005, 2006, 2007, 2008, 2009
Enertech Labs, Inc.
Last modified:
01/12/09
|
|
