|
|
|
|
ETL-1000 Cooling System Treatment Concentrate Diesel Engine Corrosion Inhibitor
PRODUCT BENEFITS ? Designed to protect cast iron diesel engine cooling systems ? Contains additives to protect against sludge and mineral scale formation ? Prevents overheating ? Effective against liner pitting and cavitation erosion ? Not harmful to radiator or heater connecting hoses, diesel liner seals and ?O-ring ? Recommended and used by major diesel engine manufacturers throughout the world
PRINCIPAL USES ETL-1000 functions as a protective, film-forming corrosion inhibitor and scale suppressant to keep engines clean and free from scale, and reduces downtime and maintenance costs. The product protects cooling systems against corrosion, liner pitting, cavitation-erosion, mineral scale deposits and electrolysis. GENERAL DESCRIPTION Characteristics: Color ? Red Odor ? Slight Solubility in water ? Soluble in all proportions Refer to the ETL-1000 Material Safety Data Sheet for additional chemical and physical properties. INSTRUCTIONS FOR USE 1. Before Treatment: Drain, chemically clean and flush the cooling system before charging with ETL-1000 to remove dirt, deposits, oil and rust particles. 2. Initial Dosage: Add ETL-1000 to the system at an initial dosage of 1 pint for every 4 gallons of cooling system capacity. 3. Preventive Maintenance Treatment: Top Off ? Never top off with plain water. Always top up with a mixture of one part ETL-1000 for every 32 parts of clean, soft water. Make Up Dosage ? Maintain the correct treatment level of inhibitor level by adding additional ETL-1000 inhibitor: ?For systems less than 20 gallons: One pint for ?every 4 gallon capacity, every 12,000 miles or ?250 hours. ?For systems larger than 20 gallons: One pint for ?every 20 gallons capacity, every routine service. Product Life ? ETL-1000, once in use, should be drained and flushed once every 12 months. TESTING For control, use a test kit available from Enertech Labs that tests for glycol and nitrite. Maintain a nitrite reserve of 1000?1500 ppm. HANDLING AND STORAGE Read the label and Material Safety Data Sheet for complete handling information before using this product. ETL-1000 may be stored up to one year. The product becomes ?mushy? at ?15?F (?26?C) and is satisfactory for use after complete thawing. QUALITY This product is made under ISO9002. REMARKS Technical representatives can assist in the evaluation and implementation of a treatment program involving this product.
|
|
Send mail to
sales@enertechlabs.com with
questions or comments about this web site.
|
