|
|
|
|
EnerFlow™ 1000
Enertech Labs, Inc. Biodiesel Performance Additive EnerFlow™ 1000 is a Completely New Additive Package for Bulk Treatment of B100 Biofuels. Proprietary Formulation based on a combination of the newest biofuel cold flow improvement technologies. Treats transesterified vegetable and animal fat oil derived biodiesel. Provides Excellent Cold Weather Protection for all methyl esters. Most effective product available for hard to treat SME, RME, CME, and PME fuels. Lowers CFPP by 15F to 20F. Provides increased stability for Biodiesel. Draws out and disperses water held in the fuel. Inhibits bacterial and fungal growth in Biodiesel without the need for pesticides. "A" Rated Corrosion Inhibitor to Reduce Engine and Storage Tank Corrosion. Reduces or eliminates formation of Gums, Varnishes, and Carbon in the fuel system. Dramatically Slows Sludge Formation in Engine Oil.
Features and Benefits:
Keep Out of Reach of Children Directions: For best results, use every time you add fuel to your storage tank, adding contents to tank prior to unloading fuel. The fuel delivery process will ensure that complete and proper mixing takes place. Use 1 gallon for each 100 to 1000 gallons of fuel (1:100 - 1:1000 treatment ratio). EnerFlow 1000 will disperse (eliminate) up to 1/4 of its own volume of water. Results will vary depending on base product fuel is derived from. Packaging: Package Size Treats Quantity/Case Part Number32 oz. 25-250 US Gallons 12 per case 11415 1 US Gallon 100-1,000 US Gallons 4 per case 11416 5 US Gallon 500- 5,000 US Gallons 1 11417 55 US Gallons 5500-55,000 US Gallons 1 11419 275 US Gallons 2750-275,000 US Gallons 1 11400 Larger Bulk sizes available, please contact us for pricing.
Storage and Blending: Needs to be stored above 40°F. If stored below 40°F, allow product to warm up to least 60°F before use. Blending should take place with the B100 fuel at or above 60°F. For best results blend between 131F and 160F. NOTE: (Blending below this temperature range may result in performance less than described. Blending below 60 °F may result in incomplete blending and or possible product separation). Use all appropriate safety measures and extreme caution in blending at these temperatures. For more information please consult the Material Safety Data Sheet for this product. All used and unused product and its containers should be disposed of in accordance with all local, state, and federal regulations.
Notice to Purchaser: Enertech Labs, Inc. provides no warranty of any kind with respect to the product whether express or implied including without limitation, the implied warranty of merchantability or fitness for any intended use or purpose; shall not be liable under any circumstances for any loss, damage, liability, injury or expense directly or indirectly resulting from, arising or related to the use or application of product; shall not be liable for consequential or incidental damages or loss of profits; and its liability shall be limited to replacement of the product. Enertech Labs, Inc. Buffalo, NY (800) 759-2080
Created: 06/25/2005 Revised: 10/31/2008 |
|
Send mail to
sales@enertechlabs.com with
questions or comments about this web site.
|
