|
EnerFlow™
1000
Enertech Labs,
Inc.
Biodiesel
Performance Additive
EnerFlow™ 1000 is a Completely New
Additive Package for Bulk Treatment of B100 Biofuels.
Proprietary
Formulation based on a combination of the newest biofuel cold flow
improvement technologies.
Treats
transesterified vegetable and animal fat oil derived biodiesel.
Provides Excellent
Cold Weather Protection for all methyl esters. Most effective product available
for hard to treat SME, RME, CME, and PME fuels.
Lowers CFPP by
15F to 20F.
Provides increased
stability for Biodiesel.
Draws out and
disperses water held in the fuel.
Inhibits bacterial
and fungal growth in Biodiesel without the need for pesticides.
"A" Rated
Corrosion Inhibitor to Reduce Engine and Storage Tank Corrosion.
Reduces or
eliminates formation of Gums, Varnishes, and Carbon in the fuel system.
Dramatically Slows
Sludge Formation in Engine Oil.
Features and
Benefits:
-
Fully
formulated, Biodiesel additive
-
Protects against
gelling and freeze-ups
-
Excellent Fuel
System Cleaner
-
Corrosion
protection
-
Totally
disperses water
-
Inhibits growth
of bacteria and fungi without the need for pesticides
Keep Out of Reach
of Children
Directions:
For best results, use every
time you add fuel to your storage tank, adding contents to tank prior to
unloading fuel. The fuel delivery process will ensure that complete and proper
mixing takes place.
Use 1 gallon for each 100 to
1000 gallons of fuel (1:100 - 1:1000 treatment ratio).
EnerFlow 1000
will disperse (eliminate) up to 1/4 of its own volume of water.
Results will vary depending on
base product fuel is derived from.
Packaging:
Package Size
Treats Quantity/Case Part Number
32 oz.
25-250 US Gallons 12 per case 11415
1 US
Gallon 100-1,000 US Gallons
4 per case 11416
5 US Gallon
500- 5,000 US Gallons
1 11417
55 US Gallons
5500-55,000 US Gallons
1 11419
275 US Gallons
2750-275,000 US Gallons 1
11400
Larger Bulk sizes available,
please contact us for pricing.
Storage and Blending:
Needs to be stored above 40°F.
If stored below 40°F,
allow product to warm up to least 60°F before use.
Blending should take place
with the B100 fuel at or above 60°F. For
best results blend between 131F and 160F.
NOTE: (Blending below this
temperature range may
result in performance less than described. Blending below 60 °F
may result in incomplete blending and or possible product separation).
Use all appropriate safety
measures and extreme caution in blending at these temperatures.
For more information please
consult the Material Safety Data Sheet for this product.
All used and unused product
and its containers should be disposed of in accordance with all local, state,
and federal regulations.
Notice to Purchaser:
Enertech Labs, Inc. provides no warranty of any kind with respect to the product
whether express or implied including without limitation, the implied warranty of
merchantability or fitness for any intended use or purpose; shall not be liable
under any circumstances for any loss, damage, liability, injury or expense
directly or indirectly resulting from, arising or related to the use or
application of product; shall not be liable for consequential or incidental
damages or loss of profits; and its liability shall be limited to replacement of
the product.
Enertech Labs,
Inc.
Buffalo, NY (800) 759-2080
Created: 06/25/2005
Revised: 10/31/2008
Send mail to
sales@enertechlabs.com with
questions or comments about this web site.
Copyright © 2003, 2004, 2005, 2006, 2007, 2008, 2009
Enertech Labs, Inc.
Last modified:
01/12/09
|
