|
|
|
|
EnerFlow™ 20
Enertech Labs, Inc. Biodiesel Performance Additive EnerFlow™ 20 is a Completely New Additive Package for Bulk Treatment of blended Biodiesel's between B1 and B50. Proprietary Formulation based on proven technologies. Twin technologies treat both biofuel and petro-diesel components of biodiesel. Provides Excellent Cold Weather Protection for Both Components (Petro-Diesel and Bio-Diesel) of blended Biodiesel. Provides significant CFPP improvement, lowering it between 15F and 30F. Provides dramatically increased stability for Biodiesel. Slows oxidation and breakdown of blended biofuels. Draws out and disperses water held in the fuel. Inhibits bacterial and fungal growth in Biodiesel without use of pesticides. "A" Rated Corrosion Inhibitor to Reduce Engine and Storage Tank Corrosion. Reduces or eliminates formation of Gums, Varnishes, and Carbon in the fuel system. Dramatically Slows Sludge Formation in Engine Oil. Features and Benefits:
Keep Out of Reach of Children Directions: For best results, use every time you add fuel to your storage tank, adding contents to tank prior to unloading fuel. The fuel delivery process will ensure that complete and proper mixing takes place. Use 1 gallon for each 1000 gallons of fuel (1:1000 treatment ratio). It is permissible to use up to 1 gallon per 500 gallons of fuel (1:500). EnerFlow 20 will disperse (eliminate) up to 1/6 of its own volume of water. EnerFlow 20 should be stored above 40°F. If stored below 40°F, allow product to warm up to least 60°F before use. EnerFlow 20 should be mixed with blended biodiesel between 60°F and 140°F. Blending with fuel at temperatures below 60°F may result in poor or incomplete mixing and performance less than described. Use all appropriate safety measures and extreme caution in blending at these temperatures. Packaging: Package Size Treats Quantity/Case Part Number32 oz. 250 US Gallons 12 per case 11205 1 US Gallon 1,000 US Gallons 4 per case 11206 5 US Gallon 5,000 US Gallons 1 11207 55 US Gallons 55,000 US Gallons 1 11209 275 US Gallons 275,000 US Gallons 1 11200 Larger quantities available, please contact us for further information.
Storage and Blending: Needs to be stored above 40°F. If stored below 40°F, allow product to warm up to least 60°F before use. Blending should take place with B1 - B50 (includes B2, B5, B10, B20, etc.) fuel at or above 60°F. NOTE: (Blending below 60°F may result in incomplete blending, performance less than described, and or possible product separation). Use all appropriate safety measures and extreme caution in blending at these temperatures. For more information please consult the Material Safety Data Sheet for this product. All used and unused product and its containers should be disposed of in accordance with all local, state, and federal regulations.
Notice to Purchaser: Enertech Labs, Inc. provides no warranty of any kind with respect to the product whether express or implied including without limitation, the implied warranty of merchantability or fitness for any intended use or purpose; shall not be liable under any circumstances for any loss, damage, liability, injury or expense directly or indirectly resulting from, arising or related to the use or application of product; shall not be liable for consequential or incidental damages or loss of profits; and its liability shall be limited to replacement of the product. Enertech Labs, Inc. Buffalo, NY (800) 759-2080 Created: 06/25/2005 Revised: 10/31/2008 |
|
Send mail to
sales@enertechlabs.com with
questions or comments about this web site.
|
