|
EnerFlow™
20
Enertech Labs,
Inc.
Biodiesel
Performance Additive
EnerFlow™ 20 is a Completely New
Additive Package for Bulk Treatment of blended Biodiesel's between B1 and B50.
Proprietary
Formulation based on proven technologies.
Twin technologies
treat both biofuel and petro-diesel components of biodiesel.
Provides Excellent
Cold Weather Protection for Both Components (Petro-Diesel and Bio-Diesel)
of blended Biodiesel. Provides significant CFPP improvement, lowering it between
15F and 30F.
Provides
dramatically increased stability for Biodiesel.
Slows oxidation and
breakdown of blended biofuels.
Draws out and
disperses water held in the fuel.
Inhibits bacterial
and fungal growth in Biodiesel without use of pesticides.
"A" Rated
Corrosion Inhibitor to Reduce Engine and Storage Tank Corrosion.
Reduces or
eliminates formation of Gums, Varnishes, and Carbon in the fuel system.
Dramatically Slows
Sludge Formation in Engine Oil.
Features and
Benefits:
-
Fully
formulated, additive for blended Biodiesel fuels
-
Protects against
Gelling and Freeze-ups
-
Slows Oxidation and Breakdown of
Blended Biofuels
-
Excellent Fuel
System Cleaner
-
Corrosion
Protection
-
Totally
Disperses Water
-
Inhibits Growth
of Bacteria and Fungi without the use of Pesticides
Keep Out of Reach
of Children
Directions:
For best results, use every
time you add fuel to your storage tank, adding contents to tank prior to
unloading fuel. The fuel delivery process will ensure that complete and proper
mixing takes place.
Use 1 gallon for each 1000
gallons of fuel (1:1000 treatment ratio).
It is permissible to use up to
1 gallon per 500 gallons of fuel (1:500).
EnerFlow 20
will disperse (eliminate) up to 1/6 of its own volume of water.
EnerFlow 20 should be stored
above 40°F.
If stored below 40°F,
allow product to warm up to least 60°F before use.
EnerFlow 20 should be mixed
with blended biodiesel between 60°F and 140°F. Blending with fuel at
temperatures below 60°F may result in poor or incomplete mixing
and performance less than described.
Use all appropriate safety
measures and extreme caution in blending at these temperatures.
Packaging:
Package Size Treats
Quantity/Case Part Number
32 oz.
250 US Gallons 12 per case
11205
1 US Gallon
1,000 US Gallons 4 per case 11206
5 US Gallon 5,000 US
Gallons 1 11207
55 US Gallons 55,000 US Gallons 1 11209
275 US Gallons 275,000
US Gallons 1 11200
Larger quantities available, please contact
us for further information.
Storage and Blending:
Needs to be stored above 40°F.
If stored below 40°F,
allow product to warm up to least 60°F before use.
Blending should take place
with B1 - B50 (includes B2, B5, B10, B20, etc.) fuel at or above 60°F.
NOTE: (Blending below 60°F
may
result in incomplete blending, performance less than described, and or possible product separation).
Use all appropriate safety
measures and extreme caution in blending at these temperatures.
For more information please
consult the Material Safety Data Sheet for this product.
All used and unused product
and its containers should be disposed of in accordance with all local, state,
and federal regulations.
Notice to Purchaser:
Enertech Labs, Inc. provides no warranty of any kind with respect to the product
whether express or implied including without limitation, the implied warranty of
merchantability or fitness for any intended use or purpose; shall not be liable
under any circumstances for any loss, damage, liability, injury or expense
directly or indirectly resulting from, arising or related to the use or
application of product; shall not be liable for consequential or incidental
damages or loss of profits; and its liability shall be limited to replacement of
the product.
Enertech Labs,
Inc.
Buffalo, NY (800) 759-2080
Created: 06/25/2005
Revised: 10/31/2008
Send mail to
sales@enertechlabs.com with
questions or comments about this web site.
Copyright © 2003, 2004, 2005, 2006, 2007, 2008, 2009
Enertech Labs, Inc.
Last modified:
01/12/09
|
