EnerFlush™

Engine Oil Flush and Cleaner

Product Description

Sludge and Varnish can quickly build up in your engine. City driving, Idling, Air conditioner operation, Freeway driving, Pulling a trailer, Going past the suggested oil change interval,  and other stressful conditions can cause motor oil to degrade. As oil degrades; varnishes, sludges, and acids can form. These contaminants can cause an immediate deterioration in performance and can set the stage for rapid wear of components and very expensive repairs down the road.

Engine Oil Flush and Cleaners special blend of detergents and dispersants quickly and safely remove sludge and varnish from gasoline, diesel, and LPG fueled engines. In just one treatment; oil passages, screens, hydraulic lifters, pushrods, rocker arms, oil galleries and other critical engine parts are cleaned. Engine Oil Flush and Cleaner maximizes lubrication, reduces hydrocarbon and nitrogen oxide emissions, and increase bearing protection to reduce wear.

 Uses

This product is designed and recommended for use as part of a regular engine maintenance program to improve performance and significantly extend life.

Directions

1. Run engine to normal operating temperature, turn off engine.
2. Add Engine Oil Flush and Cleaner to crankcase.
3. Start engine and run at high idle for approximately ten (10) minutes, stop engine.
4. Immediately drain oil.
5. Install new oil filter, replace drain plug, and add engine oil as per manufacturer's specifications.
6. For added protection add a bottle of Enertech Engine oil Supplement

Storage

Do not store at temperatures above 120F (50C). Do not use or store near heat, spark, open flames or other sources of heat and or ignition.

Specifications

Health                          : 2                        Flash Point             : 9F

Flammability              : 3                        Evaporation Rate   : > 1 (water = 1)

Reactivity                    : 0                        Color                      : Clear Liquid

Personal Protection : B                         Odor                       : Solvent Odor

                                                           Solubility in Water : Insoluble

Packaging

Part Number        Size Bottle                  Units per Case

11804                      16 oz.                                  24

11806                       1 gallon                               4

11806A                    2.5 gallon                            2

11807                        5 gallon                              1

11809                      55 gallon                              1

Prepared 03/02/2004

Send mail to sales@enertechlabs.com with questions or comments about this web site.
Copyright © 2003, 2004, 2005, 2006, 2007, 2008, 2009 Enertech Labs, Inc.
Last modified: 01/12/09