FALLOUT REMOVER 2064

Multi Use Body Solvent

body shop safe

Description

FALLOUT REMOVER is a clear, ready-to-use liquid that effectively removes metallic fallout particles embedded in painted surfaces. FALLOUT REMOVER breaks the bond between embedded metallic particles and the painted surface.  When used as directed, FALLOUT REMOVER will not harm glass or chrome and will not soften, fade or discolor finish.

Features

• Ready-to-use

• Removes air borne metallic contaminants

• Fast acting

Benefits

• No mixing

• Lifts metallic particles without buffing

• Quickly preps vehicle for cleaning

Use for

• New car prep

• Full detailing

• Rail dust removal

Directions

Consult MSDS for complete safety information before using.

1. Rinse automobile thoroughly to remove loose surface dirt.

2. Apply FALLOUT REMOVER at full strength to the affected areas.

3. Using a sponge or wash mitt rub lightly to help loosen fallout deposits.

4. Allow the necessary time for the product to work, usually 3-5 minutes is sufficient.

5. Rinse thoroughly with water to flush away contaminants.

6. Wash vehicle and dry.

Tech Tip

Keep off aluminum and plastic moldings. Do not apply to a hot surface or let dry on surface.

Packaging

Part Number                   Size Bottle               Per Case

9820643                                          32 oz.                              12

9820644                                           1 gallon                           4

9820645                                           5 gallon pail                   1

9820646                                         30 gallon drum                1

9820647                                         55 gallon drum                1 

Prepared 03/16/2004

[ Home ] [ Up ]

Send mail to sales@enertechlabs.com with questions or comments about this web site.
Copyright © 2003, 2004, 2005, 2006, 2007, 2008 Enertech Labs, Inc.
Last modified: 08/15/08