Enertech ? RTV
Hi-Temp Silicone Gasket Maker
With the touch of a finger, you can create a gasket of any
size or shape. Unique dispenser keeps product fresh longer and is more
economical to use than a cartridge or tube. RTV gasket material skins in about
fifteen (15) minutes, and cures completely in twenty-four (24) hours. Product
will not shrink or crack when used as directed.
Extreme temperature (-85?F to 600?F+)
Not Recommended for use where there will be direct contact
with gasoline, fuel oil, diesel, caustic, or acid solutions.
Paint will not adhere to Silicone RTV.
Cam and Timing Covers, Exhaust Manifolds, Crossover
Manifolds, all other sealing and gasket applications.
- Completely remove old gasket material.
- Use a non-flammable cleaner to remove oil and grease.
Make certain surface is clean and dry.
- Hold can upside-down and exert side pressure on
dispensing stem with you finger. Draw an even bead of RTV (1/16? to 1/8? wide)
on one mating surface.
- Using clean, dry cloth, or knife, remove any excess RTV
- Wait approximately five (5) minutes for bead to begin to
?skin? before assembling parts. Be sure parts are properly aligned when
assembling. Be careful not to over-tighten bolts.
Do not store in temperatures above 120?F (50?C). Do not
puncture, incinerate, or burn can. Do not place near sources of heat.
: 1 Flash Point : 212?F
: 1 Evaporation Rate : N/A
: 0 Color : Red
: B Odor
: Acetate Acid
Solubility in Water
: > 0.1
Size Can Cans per Case
6004 7.25 oz.
Send mail to
questions or comments about this web site.
Copyright © 2003, 2004, 2005, 2006, 2007, 2008, 2009
Enertech Labs, Inc.